Create Wind Prop Manual De Instrucciones página 12

1. Align the blade holes with the screw holes on the motor, and then tighten all the screws
Select the blade screws and attach the first blade, lining up the holes in the motor with
the holes in the blade. Screw the blade in so that it is secured but without tightening the
screws too much to be able to place the rest.
2. Repeat the previous step with the rest of the blades.
3. Once all the blades are in place, tighten the screws completely so that the blades are fully
secured.
LIGH T AS SE MB LY
• Unscrew one fixing screw. Fix the patch panel to the bottom of the fan by inserting the
other two fixing screw heads into the keyhole slots, rotate it to fit, then secure the previous
fixing screw by aligning the screw hole and the keyhole. on the bottom of the fan, tighten
the remaining setscrews to secure the connection panel.
E NGL I SH
12