Create Wind Prop Manual De Instrucciones página 13

• Connect the single pin plugs on the breakout board to those on the LED panel. The LED
panel is magnetized so it attaches to the backplane by simply snapping the two pieces
together.
Note: While installing or removing the LED board, be careful not to touch the insulating tabs.
Do not overtighten or fasten the screws as this may cause damage to the insulating tabs.
• Thread the decorative shade onto the LED plate and secure with decorative clips and nuts.
C HECK THE IN STALL AT I O N
• Check the correct operation of the fan, checking that there is no strange movement or
misalignment in any part of the fan.
• In the event that any type of buzzing/vibration can be noticed, you can adjust the blades
with the balance kit that has self-adhesive counterweights and "u" clips. You can put the
clip in the center of any blade and check if the vibration decreases.
• Turn on the fan and check. If no change is seen, turn off the fan and add another clip on
another blade or use the adhesive weights.
In compliance with the directives: 2012/19/EU and 2015/863/EU on the restriction of the use of hazardous substances in
electrical and electronic equipment, as well as their waste disposal. The crossed bin symbol shown on the packaging indicates
that the product at the end of its useful life will be collected as separate waste. Therefore, any product that has reached the
end of its useful life should be delivered to waste disposal centers specialized in the separate collection of waste electrical
and electronic equipment, or returned to the retailer when purchasing similar new equipment, in one for a base. Proper sepa-
rate collection for subsequent commissioning of equipment sent for recycling, treatment and disposal in an environmentally
compatible manner helps prevent possible negative effects on the environment and health and optimizes recycling and reuse
of waste. the components that make up the device. The abusive disposal of the product by the user implies the application of
administrative sanctions in accordance with the laws.
E NGLI SH
13