Kenwood R-1000 Manual De Instrucciones página 13

Example 1: Setting at 9:00 AM
Using a time signal from a radio station, zero the clock (se-
cond digits are not displayed).
a. First depress and hold the HOUR and MINUTE switches
simultaneously before the time signal is received.
The clock is now set to 00 minute and 00 second,
indicating 1 : 00.
b. Release both the HOUR and MINUTE switches at the
time signal. The clock will count seconds.
c. Next. press the HOUR switch 8 times. As an alter-
native. keep the switch depressed, and release when
the clock indicates 8:00. Then press the switch once
again and the clock will indicate 9:00.
FUNCTION TIME SET
FREQUENCY
©i
HOUR
n
nn
l.LI LI
[ L_CLOCK_j
l._FREQUENCY
=i
AMCJON
PMCJ
TIMER SET
POWER
111
_._ON
111
LJ
..11..oFF
LJOFF
After step a and b, depress
HOUR switch 9 times.
Fig. 3-5 Setting at 9:00 AM
NOTE:
When either switch has been pressed past the desired
time. advance the clock until it returns to the desired
time.
When pressing the HOUR switch. observe the AM or
PM indicators.
Example 2: Setting at 2:15 PM
8
a. First set the clock to 00 second using a time signal. as
in Example 1.
b. Next. keep the HOU R switch depressed. When the
clock advances past 12:00 AM. the PM indicator will
light. Release the HOUR switch at 2:00 PM.
c. Press the MINUTE switch toset the minute digits to 15.
FUNCTION TIME SET
FREQUENCY
<l/j
l
CLOCK
-~
HOUR
TIMER SET
POWER TIMER
~ ~~~F
LJOFF
f / /-
!AMCJ
C.
I
J
._ _ _ _ _ _ __,PM DON
f L_CLOCK_j
l._FREQUENCY
=i
After step a. depress
HOU R switch to show 2 PM.
Next, depress MINUTE
switch to show 2: 15 PM.
Fig. 3-6 Setting at 2: 15 PM
3.7 TIMER
The timer turns ON and OFF at any designated time.
Example: To turn ON at 11: 15 AM and OFF at 1 :30 PM,
proceed:
1. Setting the ON time (11 :15 AM)
Turn the TIMER switch OFF.
Turn the FUNCTION switch ON.
a. Depress the HOUR and MINUTE switches simulta-
neously. The clock indicates 0:00.
b. Set the hour digits to "11" by pressing the HOUR
switch.
c. Next. set the minute digits to "15" by pressing the
MINUTE switch.
FUNCTION TIME SET
HOUR
POWER TIMER
111
_._ON
111
LJ
..11..oFF
LJOFF
FUNCTION TIME SET
POWER
TIMER
111
_._ON
111
LJ
..11.. 0 FF
LJOFF
FUNCTION
TIME SET
FREQUENCY
~1 HOUR
TIMER SET
POWER TIMER
111
_._ON
111
LJ
_._OFF
LJ OFF
1111n
Ll.!„J LI
[ L_CLOCK_j
l._FREQUENCY
=i
AMCJON
PMCJ
Turn the FUNCTION switch
ON. Depress the HOUR
and MINUTE switches
simultaneously.
The clock indicates 0:00.
I 1/1 i/
I l.L/ LI
[ L_CLOCK_j
l._FREQUENCY
=i
AMCJON
PMCJ
Set the hour digits to "11 ".
I I
I
C:
I I • I J
I
AMCJON
PMCJ
'---~~~~~~___J
[ L_CLOCK_j
l._FREQUENCY
=i
Set the minute digits to
"15".
Fig. 3-7 Setting the ON Time (11: 15 AM)