Publicidad
Idiomas disponibles
Idiomas disponibles
2 - INTRODUCING THE PRODUCT
2.1 - Description of the control unit
The CT10324 control unit is the most modern and efficient control
device for 24VDC Key Automation gear motors for sliding gates; any
other use is to be considered improper and is therefore prohibited.
The 5-digit/14-segment display of the CT10324 control unit makes
1
ENC
NEG
12
2.2 - Description of the connections
1- Motor power supply (M+ and M-)
2- Transformer power connector
3- Connection of flashing light, gate open/electric lock warning
light, courtesy light
4- 24 VAC connector for control and safety devices
5- 24 VDC unregulated for safety devices (photocell and radio
safety edge)
6- Safety input for STOP connection or edge and photocell
7- Connector for control devices
8- Red safety LED for EDGE, PH2, PH1 inputs; Green LED for
OPEN, CLOSE, PAR, SBS inputs
9- DIP SWITCH safety exclusion toggle switch
10- Connector for limit switches
11- Red LED indicators for limit switches
2.3 - Models and technical characteristics
CODE
DESCRIPTION
CT10324
24V control unit for a sliding gate, overhead door or barrier
•
Electronic protection against short circuit and overload at the
FLASH, IND/ELEC and LED outputs
•
Protection of 24VAC and PH-POW outputs via resettable fuses
•
Automatic obstacle detection
13
M +
M -
V+
POWER
SUPPLY
3
2
it easier to read the acronyms, facilitating programming and
monitoring of the automation; the menu structure allows easy setting
of work times and operating modes.
10
19
21
14
17
11
9
16
8
ON
STOP
PH2
PH1
OPEN CLOSE PAR
4
5
6
12- Connector for KBP/KBPN battery charger
13- 1.6 AT fuse (timed)
14- 5-digit, 14-segment function display
15- Movement button
16- Button
(UP)
17- Button
(MENU)
18- Button
(DOWN-RADIO)
19- LED RADIO indicator
20- Antenna
21- SBK: fitting for energy saving module when the control unit is
not active (optional)
22- Connector for KUBE / PowerBus interface (optional)
•
Auto-learning of the stroke length
•
Disabling of unused safety inputs via dip switch: it is not
necessary to insert jumpers on the respective input terminals
(paragraph 4.2)
ANT
SHIELD
20
18
15
22
SBS
7
(SBS)
EN
5
Publicidad
