B
B
Positioning
Install this appliance at a location where the ambient temperature corresponds to the climate
class indicated on the rating plate of the appliance:
Location
The appliance should be installed away from heat sources, e.g. radiators, boilers, direct
sunlight, etc. Make sure that air can circulate freely around the back of the appliance. To
ensure optimum performance, if the appliance is positioned under a protruding wall unit,
the minimum distance between the top of the appliance and the wall unit should be at least
100 mm. However, ideally the appliance should not be placed under a protruding wall unit.
Precise horizontal alignment is enabled by one or more adjustable feet under the appliance.
WARNING!
It is possible to unplug the appliance from the mains
socket. The plug must therefore be easily accessible
after installation.
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond
to your domestic power supply. This appliance must be earthed. The power cord plug has
an earthing contact. If the household electrical outlet is not earthed, connect the appliance
to a separate earthed circuit conforming to current regulations. For this consult a qualified
electrician.
The manufacturer declines all responsibility if the above safety precautions are not observed.
This appliance complies with European regulations.
When using the appliance
7
7
EN