Maintenance; Safety Recommendations; Routine Maintenance - Dolmar RM-72.13 H Manual De Instrucciones

6. MAINTENANCE

6.1 SAFETY RECOMMENDATIONS

Before cleaning or doing maintenance
work, take out the ignition key and read the relevant instruc-
tions. Wear adequate clothing and work gloves whenever
your hands are at risk.
Never use the machine with worn or
damaged parts. Faulty or worn-out parts must always be re-
placed and not repaired. Only use original spare parts: The
use or non-original and/or incorrectly fitted parts will com-
promise the safety of the machine, may cause accidents or
personal injuries for which the Manufacturer is under no cir-
cumstance liable or responsible.
IMPORTANT
Never get rid of used oil, fuel or other pollu-
tants in unauthorised places!
Any adjustments or maintenance opera-
tions not described in this manual must be carried out by
your Dealer or a specialized Service Centre. Both have the
necessary knowledge and equipment to ensure that the
work is done correctly without affecting the safety of the
machine.
You must go to a specialised Service Centre or contact your
Dealer if the following are malfunctioning:
– the brake;
– the engagement and stop of the blade;
– the drive engagement in forward and in reverse gears.
EN 22

6.2 ROUTINE MAINTENANCE

The following table is to help you maintain your machine's safety
and performance.
It shows the main maintenance and lubrication operations and their
frequency. To the right of each item, there is a box where you can
write the date or after how many operating hours the work was car-
ried out.
Operation
1. MACHINE
1.1 Check of tight fixing and sharpness of blade
1.2 Blade replacement
3)
1.3 Check of the transmission belt
3)
1.4 Transmission belt replacement
2) 3)
1.5 Checking the blade drive belt
3)
1.6 Blade drive belt replacement
2) 3)
1.7 Check and adjustment of brake
3)
1.8 Check and adjustment of drive
3)
1.9 Check blade engagement and brake
1.10 Check of tight fixing of all the elements
1.11 General lubrication
4)
2. ENGINE
1)
2.1 Engine oil change
2.2 Check and cleaning of air filter
2.3 Air filter replacement
2.4 Check of fuel filter
2.5 Fuel filter replacement
2.6 Check and cleaning of spark plug points
2.7 Replacement of spark plug
Hours Completed (Date or Time)
25
3)
100
25
–
25
–
25
25
25
3)
25
25
.....
.....
.....
.....
.....
.....
.....