melitta Caffeo Lattea F300-100 Manual De Instrucciones página 64

Display
• Press the ON/OFF button
→ All symbols in the display flash briefly for confirmation. The appliance is
ready for operation, the standby symbol
Note
You can wake up the appliance from the energy-saving mode by pressing on
the button for coffee strength
10.3 Auto-OFF function
The device switches off automatically after the last action (depending on the
setting). You can set different times for the auto-OFF function. The appliance is
factory-set at 30 minutes
Prerequisite: The appliance must be ready for operation (see „Switching on
and off" on page 52).
Please adjust the timer as follows:
• Simultaneously press the button for one-cup dispensing
button for two-cup dispensing
→ The standby symbol
• Press the button for one-cup dispensing
menu for the Auto-OFF function.
→ The symbol for the drip tray
Heft_Lattea_EU_2_3.indd 61
Time
5 minutes
(factory setting)
15 minutes
30 minutes
off
flashing
to confirm the selected time.
. You can then immediately dispense coffee.
.
is flashing.
is illuminated.
is illuminated.
for more than 2 seconds.
three times to call up the
and the
61
09.04.2014 14:04:20