melitta Caffeo Lattea F300-100 Manual De Instrucciones página 69

11.2 Cleaning the brewing unit
Prerequisite: The appliance must be switched off (see „Switching on and off"
on page 52).
Note
For optimal protection of your appliance, we recommend that you clean the
brewing unit under running tap water once a week.
Reach into the recess on the right side of the appliance (Fig. A, no. 14)
•
and pull off the cover to the right.
Press and hold the red button on the handle of the brewing unit (Fig. B,
•
no. 1) and turn the handle clockwise to the stop (approximately 75°).
• Use the handle to pull the brewing unit out of the appliance.
• Leave the brewing unit as it is (do not move or twist the components of
the brewing unit).
• Thoroughly rinse off the entire brewing unit from all sides under running
water. Make sure particularly that the surface shown in Fig. D is free of
coffee residues.
Caution!
Never clean the brewing unit in the dishwasher.
• Let the brewing unit drip dry.
• If necessary, remove coffee residues from the surfaces in the interior of
the appliance where the brewing unit is inserted.
• Reinsert the brewing unit into the appliance and turn the handle of the
brewing unit anti-clockwise to the stop to lock.
• Insert the four catches of the cover into the back of the appliance and
swing the cover to the left until it locks into place.
66
Heft_Lattea_EU_2_3.indd 66 09.04.2014 14:04:22