melitta Caffeo Lattea F300-100 Manual De Instrucciones página 67

10.6 Grinding fineness
The grinding fineness level was optimally adjusted prior to delivery. Consequently,
we recommend that you only readjust grinding fineness after dispensing
approximately 1,000 coffees (about 1 year).
You can only set the grinding fineness while the mill is running. Thus, adjust
grinding fineness directly after coffee dispensing starts.
If the coffee flavour is not sufficiently intense, then we recommend that you set a
finer grinding level.
Reach into the recess on the right side of the appliance (Fig. A, no. 14)
•
and pull off the cover to the right.
• Start a normal coffee dispensing process.
While the grinder is running: Place the lever in one of the three
•
positions (Fig. E).
• Insert the four catches of the cover into the back of the appliance and
swing the cover to the left until it locks into place.
Lever position
Left
Centre
Right
64
Heft_Lattea_EU_2_3.indd 64
Grinding fineness
Fine
Medium
Coarse
(factory setting)
09.04.2014 14:04:22