Publicidad
Idiomas disponibles
Idiomas disponibles
12
Transport and disposal
12.1 Preparation for transport, protection against freezing
and measures for longer periods of non-use
Venting the appliance
We recommend that you vent the appliance if it will not be used for an extended
period of time and before transport. This also protects the appliance against frost
damage.
Prerequisite: The appliance must be ready for operation (see „Switching on
and off" on page 52).
Take the Melitta
•
Simultaneously press both the button for one-cup dispensing
the ON/OFF button
→ The standby symbol
the symbol for the water tank
•
Open up the flap of the water tank (Fig. A, no. 7) and pull the water tank
up and out of the appliance.
→ The symbol for the milk shower
•
Place a vessel under the milk shower.
Turn the rotary switch for the milk shower (Fig. A, no. 11) clockwise to
•
open the milk shower.
→ Water runs out of the milk shower and into the vessel; also steam escapes.
The symbol for the milk shower
Warning!
Danger of scalding by hot steam
Make sure that you do not burn yourself on the hot steam escaping from the
milk shower during the venting process.
•
As soon as no more steam is emerging, turn the rotary switch for the
milk shower anti-clockwise to close the milk shower.
Heft_Lattea_EU_2_3.indd 73
Claris
water filter out of the water tank.
®
®
for longer than 2 seconds.
flashes during a brief heat-up phase. Subsequently,
is illuminated.
is illuminated.
is flashing.
and
73
09.04.2014 14:04:23
Publicidad
