Krups EVIDENCE CLASSIC EA89 Serie Guia De Inicio Rapido página 23

HOW TO ACTIVATE THE TWO DRINK FUNCTION
Your appliance allows you to prepare two cups at the same time. The two-drink function works by simply pressing the
selection twice in succession and can be used for all drinks (except
HOW TO ACTIVATE THE DARK FUNCTION
The "DARK" function allows you to increase the intensity (strength) of the coffee.
You can enable or disable it in different ways:
• Before selecting the chosen drink, simply press DARK.
• While the drink is being made, and as long as grinding is in progress: you can press DARK.
• By choosing "DARK" in the Settings menu. To do this, go to the Settings menu by pressing
drinks settings -> Dark.
The function will then be enabled for all "coffee" drinks:
You can do the same to disable it.
HOW TO ACTIVATE THE EXTRA SHOT FUNCTION
The "extra shot" function allows you to add an Espresso at the end of the selected drink.
You can enable or disable it in different ways:
• Before selecting the chosen drink: simply press EXTRA SHOT.
• While the drink is being made
• By choosing "EXTRA SHOT" in the Settings menu. To do this, go to the Settings menu by pressing...,
then Settings -> drinks settings -> EXTRA SHOT. The function will then be enabled for the drinks shown below.
, , , , .
You can do the same to disable it
MILKY DRINKS
Hints & tips
To make frothy milk, you should opt for pasteurised UHT milk from the fridge (3–5°C). The use of special milks
(micro filtered, raw, fermented, enriched) or plant milks (rice, oat or almond) can give results that are less
satisfactory in terms of the quality and quantity of froth. Once the milk bottle is open, whether plastic or glass, it
must be stored in a refrigerator at 4°C or below. Milk can usually be stored for between 5 and 7 days.
HOW TO START PREPARING A MILKY DRINK
• Connect the milk tube to the right side of the "One Touch Cappuccino" block.
• Immerse the other end of the tube (metal side) in a container filled with milk or directly in your milk bottle.
• Place the cup(s) under the nozzles.
• Select the milky drink of your choice (size, coffee strength, x2, extra shot).
• The preparation will start with milk frothing followed by coffee flow or vice-versa depending on the recipe.
• You can adjust the volume using the buttons
These stages will take place automatically, then your drink is ready for drinking.
For more information see the beginning of chapter 5.A "PREPARING A MILKY DRINK" of the quick start guide.
!
Important: At the end of each recipe, the machine suggests a milk rinsing. We recommend that you do this to
ensure optimum hygiene and the proper operation of your milk system. See Chapter 5.B "QUICK RINSE AFTER A
MILKY DRINK (30s)" of the quick start guide.
40
and ).
, then Settings ->
, , , .
or during preparation.
TEA AND INFUSIONS
HOW TO START PREPARING TEA OR AN INFUSION?
Hints & tips
Your device offers you the preparation of 3 types of tea (green tea, black tea and infusions). You can adjust the
volume of the drink according to your tastes. The temperature of the hot water is adapted to the selected drink.
• Select the icon
• Select the drink and press .
• You can adjust the volume using the
Carrying out proper maintenance will prolong the life of your machine and preserve the authentic taste of your coffee.
For hygiene reasons, we recommend that you rinse the coffee machine every day or when it has not been used for
a while (more than 2 days). You can set up automatic rinsing, which guarantees the best tasting coffee and optimal
,
hygiene. Refer to the OTHER FUNCTIONS chapter.
MAINTENANCE OF THE COFFEE GROUNDS CONTAINER AND DRIP TRAY
The drip tray receives used water and the coffee grounds container receives extracted grounds.
!
Important: The drip tray allows you to collect the water or the coffee that flows from the appliance during and after
preparations. It is important to always leave it in place and to empty and clean it every day. The two orange floats in
the drip tray tell you when it is time to empty the water out of the container.
HOW TO EMPTY AND CLEAN THE DRIP TRAY
See chapters 9.A "EMPTYING THE DRIP TRAY" and 9.B "CLEANING THE DRIP TRAY REGULARLY" of the quick
start guide.
For hygiene reasons, as this tray is in contact with milk and coffee, we advise you to disassemble and clean each part
with a sponge in warm soapy water every day. We also recommend that each part is air-dried before refitting and
replacing it. Do not put in a dishwasher.
HOW TO EMPTY AND CLEAN THE COFFEE GROUNDS CONTAINER
See chapters 8.A "EMPTYING THE COFFEE GROUNDS CONTAINER" and 8.B "CLEANING THE COFFEE
GROUNDS CONTAINER REGULARLY" of the quick start guide.
When requested by the machine.
You can empty it regularly and before the machine requests it, but when the machine is lit up this is so that it can record
that the container has indeed been emptied. For hygiene reasons, we advise you to clean the grounds container with a
sponge in warm soapy water every day. We also recommend that you air dry this part before replacing it.
Do not put in a dishwasher.
!
Important: Failure to regularly empty your coffee grounds container and drip tray as indicated above may damage
your appliance.
or , buttons during preparation.
GENERAL MAINTENANCE
41