Krups EVIDENCE CLASSIC EA89 Serie Guia De Inicio Rapido página 25

OTHER FUNCTIONS
HOW TO ACCESS YOUR MACHINE'S SETTINGS?
Your KRUPS Intuition machine has many settings, do not hesitate to try them! This will allow you to personalise your
experience even more.
The Settings menu can be accessed via the button
maintenance and product info).
SETTINGS
By selecting Settings, you can make the changes you want for optimum comfort of use, adapted to your preferences.
The main settings available are:
Date Setting the date is required, particularly if using an anti-limescale cartridge.
Clock You can either select a 12 or 24 hour clock display.
Language You can select the language of your choice from the options provided.
Unit of
You can select the unit of measurement between ml and oz.
measurement
Screen brightness You can adjust the screen brightness according to your preference.
Coffee
You can adjust the temperature of your coffee drinks to three levels.
temperature
Tea temperature You can adjust the temperature of your tea to three levels.
You must set your water hardness between 0 and 4. See chapter "Measuring water
Water hardness
hardness"
Auto on: You can automatically start preheating the appliance at a chosen time.
You can choose the length of time after which your selected appliance will automatically
Auto-off
stop (period of non-use).
You can choose to activate automatic rinsing of the coffee outlet or not when starting the
Auto rinsing
machine.
You can restore the default settings. You can also permanently activate the Dark and Extra
Drinks settings
Shot function.
To exit the settings menu, press or the Settings button.
If you unplug the machine, the settings, apart from the date and the time, will be stored in the memory.
INFO
The "Info" menu provides access to a number of pieces of information about your use and about certain stages in the
life of your machine. It also informs you about its maintenance. The main information available is:
Drinks prepared Displays the number of drinks made.
Coffee circuit cleaning Indicates that it should be done in x number of cycles.
Descaling Indicates that it should be done in x number of cycles.
Filter
Indicates that it will be changed in x days or x litres.
To exit the Info menu, press or the Settings button
44
that allows access to the general menu (machine settings,
ANSWERS TO YOUR QUESTIONS
OPERATION
1. The machine displays a fault, the software is frozen OR the machine is malfunctioning.
Turn off and unplug the machine, remove the filter cartridge, wait 1 minute and restart the machine.
Press and hold the ON/OFF button for at least 3 seconds to start.
2. The appliance does not turn on after pressing the ON/OFF button (for at least 3 seconds).
Check the fuses and the power socket of your electrical installation. Check that the two power plugs are correctly
inserted into the socket.
3. A power failure has occurred during a cycle.
The appliance resets automatically when it turns back on.
4. The grinder is running empty.
This is normal if it happens occasionally and if there are no coffee beans or only a small amount. It can run for up to 10
seconds off-load to know its consumption and ensure the correct operation of its function.
Coffee beans remain in the container:
• The coffee may be too oily and is therefore not being correctly captured by the appliance. You could try helping the beans
to go down and see if that gets it working again. However, it is advisable to change coffee (ref. type of beans function).
• This is my usual coffee that has worked well until now: contact your KRUPS consumer service.
USE
1. The grinder makes an abnormal noise.
Foreign bodies are surely present in the grinder. Try to clean out with a vacuum cleaner, otherwise contact your KRUPS
consumer service.
2. There is water under the appliance.
Before removing the drip tray, wait 15 seconds after the flow of coffee so that the machine finishes its cycle
correctly.
Check that the drip tray is well positioned on the machine. It must always be in place even when the machine is not in
use.
Verify that the drip tray is not full.
3. The adjustment button for the grinding fineness is difficult to turn.
Turn the adjustment button of the grinding fineness only when the grinder is operating.
4. The appliance has not delivered any coffee.
An incident has been detected during its making.
The appliance is reset automatically and is ready for a new cycle.
5. You have used ground coffee instead of coffee beans.
Use your vacuum cleaner to collect the ground coffee contained in the bean container.
6. Water runs from the coffee nozzles when the machine stops.
This is normal. It is an automatic rinsing process to clean the coffee nozzles and ensure that they do not become
blocked.
STEAM AND MILK
1. The milk flow of your machine appears to be partially or completely blocked. Clean the "One Touch Cappuccino"
block.
See the quick start guide - "DEEP MANUAL CLEANING OF THE MILK DISTRIBUTION SYSTEM - 5 MIN".
2. No steam comes out.
a. When using a steam cycle for the first time, if no steam comes out correctly: Check that the steam output is not
blocked. See above: "The steam output of your machine appears to be partially or completely blocked".
Perform the following process once only:
Empty the water tank and temporarily remove the Claris Aqua Filter System cartridge. Fill the tank with mineral
water high in calcium (>100 mg/L) and make successive steam cycles (5 to 10 cycles) in a container until a
continuous jet of steam is obtained. Put the cartridge back in the tank.
b. The steam nozzle had already worked:
Check that the steam output is not blocked. See above: "The steam output of your machine appears to be partially
or completely blocked".
If after completing the above steps it still does not work, please contact your service centre.
45