Cameo F2 FC PLUS Manual De Usuario página 15

left encoder. Confirm the selection by pressing the left encoder (ENTER); this will also automati-
cally take you back to the main screen and the DMX mode will be activated. Tables showing the
channel assignment of the different DMX modes can be found in these instructions under DMX
CONTROL.
CCT STAND-ALONE MODE (Correlated Colour Temperature)
Starting from the main screen, press the left encoder to access the menu for selecting the ope-
rating mode (Mode). Turn the left encoder (SELECT) to select CCT mode (note the selection arrow
on the left) and confirm by pressing the left encoder (ENTER). You can now set the brightness
(DIM), colour temperature (CCT) and colour tone (Tint) using the three rotary-push encoders (see
illustration).
Currently activated operating mode
Turn encoder =
Set brightness (DIM)
Press encoder =
Select operating mode (Mode)
HSI STAND-ALONE MODE (Hue - Saturation - Intensity)
Starting from the main screen, press the left encoder to access the menu for selecting the ope-
rating mode (Mode). Now turn the left encoder (SELECT) to select HSI mode (note the selection
arrow on the left) and confirm by pressing the left encoder (ENTER). You can now set the bright-
ness (DIM), hue (HUE) and colour saturation (SAT) using the three rotary-push encoders (see
illustration).
Turn encoder =
Set colour temperature (CCT)
Fan mode
Turn encoder =
Set colour tone (Tint)
Press encoder =
Open main menu (Menu)
15