Publicidad
Idiomas disponibles
Idiomas disponibles
To give the preset a custom name with up to 12 characters (Edit User Color Name), turn the left
encoder to select a letter, underscore or number for the first character and confirm by pressing
the left encoder. Repeat this process for the second and following characters. Once the preset
name is complete, press the centre encoder (Save&Next) to go to the next editing step. If you
press "Save&Next" before selecting a letter, underscore or number for the first position, the previ-
ous preset name is retained and you are taken straight to the next editing step.
Now decide how you want to create the colour for the preset. Choose between the 4 methods
"CCT", "HSI", "DIRECT" and "GEL" by turning the left encoder (SELECT) and confirm by pressing
the left encoder (ENTER).
Now set the desired colour as described in the instructions for the respective stand-alone mode
and press the left encoder (ENTER/Save) to confirm.
PLAY LOOP STAND-ALONE MODE (8-step colour sequences 1 - 8)
Starting from the main screen, press the left encoder to access the menu for selecting the ope-
rating mode (Mode). Turn the left encoder (SELECT) to select Play Loop mode (note the selection
arrow on the left) and confirm by pressing the left encoder (ENTER). Now select one of the 8
pre-programmed but customizable colour sequences by turning the left encoder. Confirm your
selection by pressing the left encoder (ENTER). Set the brightness (DIM) of the colour sequence
using the left encoder. Set the step duration (0.1 seconds to 21 minutes and 2 random modes)
and the fade time (0 seconds to 18 minutes and 2 random modes) using the centre and right
encoders (see illustration). You can customize the settings and rename colour sequences by
selecting "Edit Loop" in the main menu.
18
Publicidad
