Publicidad
Idiomas disponibles
Idiomas disponibles
SLAVE MODE
Starting from the main screen, press the left encoder to access the menu for selecting the ope-
rating mode (Mode). Turn the left encoder to select Slave (note the selection arrow on the left)
and confirm by pressing the encoder (ENTER). Slave mode is now enabled, and the main screen
is automatically displayed. Connect the slave and the master units (same model, same software
version) using a DMX cable and enable one of the stand-alone modes on the master unit. The
slave unit will now follow the master unit.
Currently activated operating mode
Press encoder =
Select operating mode (Mode)
DMX OPERATION
Starting from the main screen, press the left encoder to access the menu for selecting the
operating mode (Mode). Turn the left encoder to select DMX (note the selection arrow on the left)
and confirm by pressing the encoder (ENTER). DMX mode is now enabled and the main screen is
automatically shown again. Choose one of the ten available DMX modes by selecting DMX Mode
in the main menu (see SET DMX MODE).
DEVICE SETTINGS (Settings)
Starting from the main screen, press the right rotary-push encoder to enter the main menu. Turn
the left encoder (SELECT) to select Settings (note the selection arrow on the left) and confirm
by pressing the left encoder (ENTER). This will take you to the submenu for editing the following
submenu items (see table, select with SELECT, confirm with ENTER, change value or status with
SELECT, confirm with ENTER ).
20
Fan mode
Press encoder =
Open main menu (Menu)
Publicidad
