Currently activated operating mode
Turn encoder =
Set brightness (DIM)
Press encoder =
Select operating mode (Mode)
EDIT PLAY LOOP STAND-ALONE MODE (Edit Loop)
Starting from the main screen, press the right rotary-push encoder to enter the main menu. Turn
the left encoder (SELECT) to select Edit Loop (note the selection arrow on the left) and confirm by
pressing the left encoder (ENTER). You can now select one of the 8 colour sequences by turning
the left encoder and confirm your selection by pressing the left encoder (ENTER).
To give the colour sequence a custom name with up to 12 characters (Edit Loop Name), turn
the left encoder to select a letter, underscore or number for the first character and confirm by
pressing the left encoder. Repeat this process for the second and following characters. Once the
preset name is complete, press the centre encoder (Save&Next) to go to the next editing step. If
you press "Save&Next" before selecting a letter, underscore or number for the first position, the
previous preset name is retained and you are taken straight to the next editing step.
Select step 1 of the 8-step sequence (Step1 - Step8) by turning the left encoder to then set the
colour of the step (Step1, note the selection arrow). Now select one of the colours defined in the
User Color stand-alone mode by turning the centre encoder and confirm the selection for step
1 by pressing the centre encoder. The selected colour of the respective step is indicated visually
by a box with a light background below the colour numbers 1 to 8. Proceed in the same way to
define the colours in steps 2 to 8. Complete the process and save the sequence by pressing the
left encoder (ENTER).
Turn encoder =
Set step duration (t-step)
Press encoder =
back to colour sequence selection (Back)
Fan mode
Turn encoder =
Set fade time (t-fade)
Press encoder =
Open main menu (Menu)
19