Cameo F2 FC PLUS Manual De Usuario página 16

Currently activated operating mode
Turn encoder =
Set brightness (DIM)
Press encoder =
Select operating mode (Mode)
DIRECT LED STAND-ALONE MODE (RGBAL colour mixing)
Starting from the main screen, press the left encoder to access the menu for selecting the opera-
ting mode (Mode). Turn the left encoder (SELECT) to select Direct LED mode (note the selection
arrow on the left) and confirm by pressing the left encoder (ENTER). You can now set the overall
brightness (DIM) and the intensity of R, G, B, A and L using the three rotary-push encoders (see
illustration).
Currently activated operating mode
Turn encoder =
Set total brightness (DIM)
Press encoder =
Select operating mode (Mode)
GEL STAND-ALONE MODE (Colour filter presets)
Starting from the main screen, press the left encoder to access the menu for selecting the opera-
ting mode (Mode). Turn the left encoder (SELECT) to select GEL mode (note the selection arrow on
the left) and confirm by pressing the left encoder (ENTER). Now set the brightness (DIM) and co-
lour filter preset (Gel) using the left and centre rotary-push encoders (see illustration). The colour
filter presets with Lee filter designations can be found in the DMX tables under DMX CONTROL
(channel 16 in 18-channel full access mode, without user colour 1 - 8).
16
Turn encoder =
Set colour tone (HUE)
Turn encoder =
Set brightness of R, B, or L
Press encoder =
Switch between R+G and B+A and L (Colour)
Fan mode
Turn encoder =
Set colour saturation (SAT)
Press encoder =
Open main menu (Menu)
Fan mode
Turn encoder
Set the brightness of G or A
Press encoder =
Open main menu (Menu)