Publicidad
Idiomas disponibles
Idiomas disponibles
MANUAL LOCKING FUNCTION
In addition to the ability to automatically protect the light from accidental and unauthorised
operation (see "Settings" - "Auto-lock"), the controls can also be locked manually. Press and hold
the centre and right rotary-push encoders simultaneously for approx. 3 seconds. If an attempt is
made to change settings, "Locked!" will appear in the display and changing the settings of the
light via the controls is no longer possible. After approx. 1 minute, the current operating mode is
displayed again. To unlock, press and hold the centre and right rotary-push encoders simulta-
neously for approx. 3 seconds. The display will show the previously displayed information.
SETUP AND INSTALLATION
Thanks to its four plastic feet, the light can be positioned in a suitable location on a level surface.
Truss mounting is possible with the pre-installed mounting bracket (A) and a suitable truss clamp
(not included). Ensure firm connections and secure the light by attaching a suitable safety cable
to the securing lug (B) on top of the housing. Use the lever screw (C) on one side to adjust the
vertical beam angle.
Important safety instructions: Overhead installation requires extensive expe-
rience, including calculating the load limit values of the mounting hardware and
regular safety checks of all installation materials and lights. If you do not have these
qualifications, do not attempt to perform an installation yourself. Refer instead to a
qualified professional.
A
C
BARNDOOR AND FILTER FRAME
ASSEMBLY / DISASSEMBLY / LENS CLEANING
Fully disconnect the device from the mains. To install or remove the barndoor and filter frame
please push the spring-loaded locking pin (D) of the bracket so that it folds upwards. Then return
the bracket to its original position so that the locking pin re-engages.
The rubber-framed Fresnel lens (E) and the glass lens (F) behind it can be cleaned by folding the
bracket upwards (as previously described) and removing the Fresnel lens (with the rubber frame)
24
B
Publicidad
