Cameo F2 FC PLUS Manual De Usuario página 23

=
=
DIMMER CURVES
Linear
DMX value
SYSTEM INFORMATION (System Info)
Starting from the main screen, press the right rotary-push encoder to enter the main menu. Turn
the left encoder (SELECT) to select System Info (note the selection arrow on the left) and confirm
by pressing the left encoder (ENTER). By turning the left encoder, you can now view the desired
information (see table).
Device firmware
LED temperature display in degrees Celsius and Fahrenheit
Total operating time in hours and minutes
Display shutdown enabled/disabled
Operational status in the event of DMX signal interruption
Dimmer curve
Dimmer response
Colour drift enabled/disabled
LED PWM frequency
Factory calibration / no adjustment / user-defined adjustment
Cross-mode adjustment of red
Cross-mode adjustment of green
Cross-mode adjustment of blue
Color-Cal. A Cross-mode adjustment of amber
Color-Cal. L Cross-mode adjustment of lime
Automatic locking of the controls enabled/disabled
Fan setting
Reset to factory
settings (without
resetting the
user colours and
loops)
Reset the user
colours and loops
to factory settings
Exponential Logarithmic
DMX value
DMX value
Reset to factory settings: confirm
with ENTER, cancel with ESC
Reset to factory settings: confirm
with ENTER, cancel with ESC
S-curve
DMX value
23