John Bean B 300 Manual Del Operador página 106

106
Trouble shooting
E51
Calibration failed
• Switch unit off, wait for 20 seconds.
• Switch unit on.
• Retry calibration, or:
• Contact the service department.
E52
Calibration weight on the opposite side of the
calibration carried out by the manufacturer.
• Fit the User Calibration Weight correctly on the left
side of the fl ange. Repeat Calibration.
• Contact the service department.
E82
Fault during self-test at start-up.
• Switch unit off, wait for 20 seconds.
• Switch unit on.
E92
The gauge for the distance was not in home position
during the 2° attempt. The measuring gauge is
disabled.
• Wait for 5 seconds or press the STOP key to
continue.
E500
E501
E502
E503
E504
Laser Pointer failure
• Contact the service department.
...