Publicidad
Idiomas disponibles
Idiomas disponibles
50
Short press:
3
to con rm the
selected Rail
System
Long press:
4
Long press:
5
The corresponded indicator light is constant on for "SL,HL,VL"
Then, the digital display shows
limit setting.
Long press the button UP/DOWN to set the door to the target
OPEN limit position, then release the buttons.
Short Press the SET button once to store the open limit position,
the digital displays
to start the CLOSE travel limit setting.
Long press the button UP/DOWN to set the door to the target
CLOSE limit position then release the buttons.
Short press the SET button once to store the CLOSE limit position,
then the door drive will automatically open and close the door to
store the door weight and spring balance conditions.
Note:
a) If a system selection error occurs during the setting process,
please
click
Execute enter to exit the setting, and then execute
the rst operation again.
b) Active or change any stand alone function, refer to the below
"FUNCTION TABLE MENU".
Opening your life
to start the OPEN travel
1 7
Publicidad
