Publicidad
Idiomas disponibles
Idiomas disponibles
50
MENU 6
Partial open position
setting
means: The AUTO CLOSE
function must be enabled after
the infrared function is turned on.
After selecting, press SET to save
the setting and exit the function
setting.
Remark:
Use the Normal-Close (NC) port of
the infrared photoelectric device
to connect to the PE port of the
control box. The infrared PE port
defaults to a Normal-Close (NC)
contact to ensure that the infrared
photoelectric device has been
installed correctly. If the infrared
photoelectric device is not insta-
lled, this function must be
disabled, otherwise the drive unit
cannot execute close the door.
And digital displays faulty
Terminals for Extra Function Setting
- Press and hold SET button for
about 6 seconds to enter main
menu until "0.-" appears on the
display then release the button.
- Press "+" till "6.-" appears on the
display.
- Press SET then appears "6.0" on
the display
- Press SET enter into the Partial
open position setting
- Press SET to enter the function
menu, digital quickly display
Then it ashes
Opening your life
1 22
Publicidad
