Publicidad
Idiomas disponibles
Idiomas disponibles
50
FLASH/Warning light
output port setting
Electronic lock function is o
(default)
Electronic lock function is enabled:
1- Second after the door drive runs
to the close limit position, the
electronic lock is powered on, the
bolt is pushed out, and after 1.5
seconds electronic lock stops
supplying power.
After the door drive receives the
door opening command at the
close limit position, the electronic
lock will be powered on rstly to
retract the bolt, then the door starts
to run after 1.5 seconds, and the
electronic lock stops power supply
after the door runs for 1 second.
The default electronic lock function
Remark:
is o .
Press and hold SET button for
about 6 seconds to enter main
menu until "0.-" appears on the
display then release the button.
- Press "+" till "6.-" appears on the
display.
- Press SET then appears "6.0" on
the display
- Press "+" till "6.4" appears on the
display.
- Press SET enter into the FLASH/
Warning light output port setting.
Opening your life
1 26
Publicidad
