Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instructions
•
Display
Display on the door:
When power is first applied to the
refrigerator, the entire panel will
light up for 3 seconds and then the
normal status will be displayed,
with the default temperature of
5ºC/-18ºC respectively. If an error
occurs, the display will show the
corresponding error code (see
table on next page).
Under normal circumstances, the
display panel shows the setpoint
temperature of the refrigerator and
freezer. If no operation is
performed and the door is not
opened within 30 seconds, the
display panel will lock.
When the display screen is not lit,
the display will be lit up normally if
there is a key operation;
Icemaker display:
When the refrigerator is turned on
for the first time, the display lights
up fully for 3s, and then enters the
normal operation screen; (the
water dispenser function is set by
default for initial power on).
If there is a communication failure
between the dispenser board and
the ice maker board, the ice cube
dispenser, water dispenser,
crushed ice dispenser mode
indicators, as well as the ice maker
on/off light and filter reset indicator
light will flash simultaneously.
The current status of the dispenser
board will be displayed if there is
no fault.
•
Lock / unlock
In the unlocked state, press and
hold the lock key for 3 seconds to
activate the lock. Then a buzzer
will sound and the lock icon will
light up.
In the locked state, press and hold
the lock button for 3 seconds to
activate unlocking, then a buzzer
will sound, after which the lock
icon will turn off. The refrigerator
will automatically enter the locked
state after 30 seconds if no action
is taken.
Alarms can be deactivated during
the locked state, but all other
operations must be performed in
the unlocked state. An acoustic
error buzzer will sound if such
operations are performed in the
locked state.
•
Temperature adjustment of
refrigerating / freezing chamber
After selecting the refrigerating
chamber (freezing chamber),
press the button "+" to increase
the temperature by 1° C.
After selecting the refrigerating
chamber (freezing chamber),
press button "-" to decrease the
temperature by 1°C.
15
V.1
Publicidad
