Publicidad
Idiomas disponibles
Idiomas disponibles
3.2 DEFROSTING
•
The refrigerator is made based
on the air-cooling principle and
thus has automatic defrosting
function. Frost formed due to
change of season or temperature
may also be manually removed
by disconnection of the appliance
from power supply or by wiping
with a dry towel.
3.3 OUT OF OPERATION
Power failure: In case of power
•
failure, even if it is in summer,
foods inside the appliance can be
kept for several hours; during the
power failure, the times of door
opening shall be reduced, and no
more fresh food shall be put into
the appliance.
Long-time nonuse: The appliance
•
shall be unplugged and then
cleaned; then the doors are left
open to prevent odor.
Moving: Before the refrigerator is
•
moved, take all objects inside out,
fix the glass partitions, vegetable
holder, freezing chamber drawers
and etc. with tape, and tighten
the leveling feet; close the doors
and seal them with tape. During
moving, the appliance shall not be
laid upside down or horizontally,
or be vibrated; the inclination
during movement shall be no
more than 45°.
IMPORTANT:
The appliance shall run continuously once
it is started. Generally, the operation of
the appliance shall not be nterrupted;
otherwise the service life may be
impaired
3.4 CLEANING OF DOOR
TRAY
According to the direction arrow
•
in the figure below, use both
hands to squeeze the tray, and
push it upward, then you can take
it out.
After washing the tray having
•
been taken out, you can adjust its
installing height in accordance
with your requirement.
Soft towels or sponge dipped in
•
water and non-corrosive neutral
detergents are suggested for
cleaning. The freezer of shall be
finally cleaned with clean water
and dry cloth. Open the door for
natural drying before the power is
turned on.
Do not use hard brushes, scouring
•
pads, wire brushes, abrasives
(such as toothpaste), organic
solvents (such as alcohol, acetone,
banana oil, etc.), boiling water,
acid or alkaline items, which may
damage the fridge surface and
interior. Boiling water and organic
solvents such as benzene may
deform or damage plastic parts.
21
V.1
Publicidad
