Descargar Imprimir esta página

VALBERG SBI 14S44 C SAD929C Instrucciones De Uso página 48

Ocultar thumbs Ver también para SBI 14S44 C SAD929C:

Publicidad

Idiomas disponibles

Idiomas disponibles

C C
Useful information
Useful information
Problem
Foam in the tub
Stained tub interior
White film on inside surface
There are rust stains on
cutlery
Possible causes
Wrong detergent.
Spilled rinse aid.
Detergent with colourant
may have been used.
Hard water minerals.
The affected items are not
corrosion resistant.
A program was not run after
dishwasher salt was added.
Traces of salt have gotten
into the wash cycle.
The lid of the softer is loose.
48
EN
What to do
• Use only the special
dishwasher detergent to
avoid suds. If this occurs,
open the dishwasher and let
suds evaporate. Add 1 liter
of cold water to the bottom
of the dishwasher.
• Close the dishwasher
door, then select any cycle.
Initially, the dishwasher will
drain out the water. Open
the door after draining
stage is complete and
check if the suds have
disappeared.
• Repeat if necessary.
• Always wipe up rinse aid
spills immediately.
• Make sure that the
detergent has no colourant.
• To clean the interior, use
the damp soft cloth with
dishwasher detergent and
wear rubber gloves. Never
use any other cleaner than
dishwasher detergent for
the risk of foaming or suds.
• Avoid washing items that
are not corrosion resistant
in the dishwasher.
• Always run a wash
program without any
crockery after adding salt.
Do not select the Turbo
function (if present), after
adding dishwasher salt.
• Check the softener lid is
secure.

Publicidad

loading

Este manual también es adecuado para:

983816