Publicidad
Idiomas disponibles
Idiomas disponibles
extraction tube to determine that it will operate properly.
Ensure that chips, dust or workpiece particle cannot lead
to blockage of one of the functions.
In case of workpiece fragments jammed between saw
blade and guards disconnect the machine from the
power supply and follow the instructions given in section
Mounting the Saw Blade. Remove the jammed parts and
reassembling the saw blade.
WARNING: Blow dirt and dust out of the main
housing with dry air as often as dirt is seen
collecting in and around the air vents. Wear
approved eye protection and approved dust
mask when performing this procedure.
WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of
the tool. These chemicals may weaken the
materials used in these parts. Use a cloth
dampened only with water and mild soap. Never
let any liquid get inside the tool; never immerse any part of
the tool into a liquid.
WARNING: To reduce the risk of injury,
regularly clean the table top.
WARNING: To reduce the risk of injury,
regularly clean the dust collection system.
To maintain products SAFETY and RELIABILITY,
repair, carbon brush inspection and replacement, any
other maintenance or adjustment should be performed
by STANLEY Service Centers, always using Stanley
replacement parts.
OPTIONAL ACCESSORIES
WARNING: Since accessories, other than those
offered by STANLEY, have not been tested with
this product, use of such accessories with this
tool could be hazardous. To reduce the risk of
injury, only STANLEY, recommended accessories should
be used with this product.
Consult your dealer for further information on the
appropriate accessories.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your STANLEY product
needs replacement, or if it is of no further use to you, do
not dispose of it with household waste. Please sort it out
for separate recycling.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-
use of recycled materials helps prevent environmental
pollution and reduces the demand for raw materials.
NOTES
STANLEY's policy is one of continuous improvement to
our products and as such, we reserve the right to change
product specifications without prior notice.
Standard equipment and accessories may vary by country.
Product specifications may differ by country.
Complete product range may not be available in all
countries. Contact your local STANLEY dealers for range
availability.
SERVICE INFORMATION
STANLEY offers a full network of company-owned and/
or authorized service agents throughout your country.
All STANLEY Service Centers are staffed with trained
personnel to provide customers with efficient and reliable
power tool service. Whether you need technical advice,
repair, or genuine factory replacement parts, contact the
STANLEY location nearest to you.
TECHNICAL DATA
MITRE SAW
V
Voltage
Frequency
Hz
Power input
W
Blade diameter
in (mm)
Blade kerf thickness
in (mm)
Bore diameter
in (mm)
Max.blade speed
.../min
(rpm)
Mitre (max. positions)
left
right
Bevel (max. positions)
left
right
0°mitre, 0°bevel
45°mitre, 0°bevel
0°mitre,
45°bevel left
45°mitre,
45°bevel left
0°mitre,
45°bevel right
45°mitre,
45°bevel right
Automatic blade
sec
brake time
Weight
lbs (kg)
ENGLISH
ENGLISH
SM18
-AR -B2C -B3 -B2 -BR
220 220 120 220 127
50
50
60
60
60
1800
10" (254)
0.1 (2.8)
1 (25.4)
4800
47°
52°
45°
45°
92mm x 285mm /
80mm x 310mm
92mm x 190mm /
80mm x 210mm
47mm x 285mm /
45mm x 310mm
47mm x 190mm /
45mm x 210mm
35mm x 285mm /
25mm x 310mm
35mm x 190mm /
25mm x 210mm
<10.0
41 (18.6)
53
25
Publicidad
