Connecting An Additional Egc Compatible Unit - Oase ProfiClear Premium Compact L EGC Instrucciones De Uso

Connecting an additional EGC compatible unit

An additional EGC compatible unit can be connected to the EGC box.
• Ensure the correct connection.(→ Connecting the EGC box)
How to proceed:
1. Remove the protection cap from EGC-OUT on the EGC box and fit the plug connector of the EGC-
Connection Cable.
2. Remove the protection cap from EGC-IN on the additional unit and fit the other plug connector of
the EGCConnection Cable.
3. Remove the protection cap from EGC-OUT, fit the terminal resistor and secure it with the two
screws (max. 18 lb-in (2.0 Nm)) or connect another EGC-compatible unit.
22
EGC0031
EGC0003