Installing the control system with the EGC box
Pump fed system
• Install the control system at a minimum distance of 6.6 ft (2 m) from the pond.
• Protect the control system from direct sunlight.
• The control system is splash-proof and may be exposed to rain.
How to proceed:
1. Either attach the control system and EGC box to the container wall or use screw hooks to attach
it in a different location.
2. If the EGC box is attached to the container wall, fit both caps onto the cap nuts.
– The caps hold the EGC box in place.
The capacitor box is connected to the container wall. If the control unit is suspended from the
opposite container wall, the capacitor box must also be installed there.
ProfiClear0240
23