Publicidad
Idiomas disponibles
Idiomas disponibles
Removing/fitting the filter drum
Remove a screen element to allow work to be carried out inside the filter drum. (→ Removing/fitting a
screen element)
Removing
How to proceed:
1. Pull the rinsing device out of the fastening clips and separating plate.
2. Undo and remove both Allen screws, pull the drum motor out of the hole in the separating plate
and remove.
– Do not allow the drum motor to hang from the connection cable.
3. Undo the hose clip fastening the dirt channel.
4. Pull the dirt channel from the socket of the dirty water outlet and place it in the filter drum.
5. Open the cotter pin and pull it out.
6. Pull out the drum shaft.
7. Pull the filter drum from the separating plate and lift it out of the container.
– Proceed carefully: The fastening clips on the container wall could damage the screen elements.
ProfiClear0137
45
Publicidad
