Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
Key
Function
Timer reminder
Power indicator
Utensil position
check indicator
light
Slide Touch
Control slider
Error warning.
1) Short press the timer button to start the timer function, the time indi-
cator remains constant, the display shows the accumulated time, and
the maximum time of the function is "99:59" (99 minutes 59 seconds);
2) When the timer is running, press and hold the timer button, and the
time will be cleared and accumulated again;
3) Press and hold the timer button to disable the timer function when the
timer is running.
1) When the cooking zone is in operation, the corresponding power is
displayed (1-8, booster);
2) If there is no pot, "u" is displayed; In the keep-warm state, the display
of the cooking zone corresponding to the start shows "=".
1) The utensil indicator light is divided into two control lights;
2) If the lower cooktop detects the pot or is far away from the pot, it en-
ters an update state, for example, if the pot is detected, the correspon-
ding lower cooktop light flashes for 5 seconds and stays on, and if the
pot is not detected, the lower cooktop light turns off immediately.
3) When the cooktop is off, the warning light will always be off; (The war-
ning light for the four zones is the same).
By sliding the slider you can adjust the power of the cooking zones, the
power of the extractor hood and the timer time.
1) When a fault occurs, in case the board is faulty, the display will show
the letter "E";
2) If a fault occurs during the timing period of the board, the fault code
will continue to display the timing time after flashing for 10 seconds, and
the timing time can be displayed normally once the fault occurs.
60
How to use
English
infiniton.es
Publicidad
