ECOVACS DEEBOT T30S COMBO Serie Manual De Instrucciones página 39

No. Malfunction
The following problems appear
when DEEBOT is working:
disordered cleaning route, deviation
from the cleaning route, repeated
cleaning, or missing of small
areas to be cleaned� (If there is
10 a large area that has not been
cleaned temporarily, DEEBOT will
automatically clean the missing
area� Sometimes DEEBOT will re-
enter a cleaned room, which may
not be a repeated cleaning, but
DEEBOT finding any missing area�)
EN 38
Possible Causes
Objects such as wires and slippers placed on the
ground block the DEEBOT�
It may be that the Driving Wheels slip on the
ground when DEEBOT climbs steps, thresholds
and door bars, thus affecting its judgment of the
whole house environment�
Work on freshly waxed and polished floors or
smooth tiles, resulting in less friction between the
Driving Wheels and the floor�
Due to different home environments, some areas
cannot be cleaned�
The TrueMapping Distance Sensor is dirty or
blocked by foreign matters�
Solutions
Please tidy up the scattered objects on the ground such as wires,
slippers before cleaning� If there is any area missing, DEEBOT will
clean the missing area by itself, please do not interfere (such as
moving DEEBOT or blocking the route)�
It is recommended to close the door of this area and clean the area
separately� After cleaning, DEEBOT will return to the starting location�
Please rest assured to use�
Please wait for wax to dry before cleaning�
Tidy up the home environment to ensure that DEEBOT can enter for
cleaning�
Wipe the TrueMapping Distance Sensor with a clean soft cloth or
remove foreign matters�