BEFORE USING THE REFRIGERATOR
•
The stated energy consumption value of the refrigerator was determined with the freezer
compartment shelf or drawer removed and the refrigerator filled with the maximum amount of food.
•
Shelves and drawers can be used according to the shapes and sizes of food to be frozen.
•
Thawing frozen food in the freezer compartment saves energy and preserves the quality of the food.
C
C
C
4.2 Recommendations for the fresh food compartment
•
Make sure the food does not touch the temperature sensor in the fresh food compartment.
•
In order for the fresh food compartment to maintain its ideal storage temperature, the sensor must
not be obstructed by food.
•
Do not place hot foods or beverages inside the product.
4.3 Initial use
•
Before using the product, make sure that all preparations have been made according to the
instructions in the "Important safety and environmental instructions" and "Installation instructions"
sections.
•
Clean the interior of the refrigerator as recommended in the "Maintenance and cleaning" section.
•
Before you start the refrigerator, make sure that the interior is dry.
•
Plug the refrigerator in to a grounded socket. The interior illumination lights up when the door of the
refrigerator is opened.
•
Operate the refrigerator for 6 hours without placing any food in it, and do not open its door unless it is
necessary.
The temperature of the room where your refrigerator is
located should be at least 50 °F / 10 °C. Operating your
refrigerator in cooler conditions is not recommended for
efficiency.
The inside of your refrigerator must be thoroughly
cleaned.
If you want to install two refrigerators side by side, there
should be at least 4 cm space between them.
14