Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT SAFETY AND ENVIRONMENTAL
C
C
C
A
1.8 For products with a water dispenser / ice machine
•
The operating pressure for cold water inlet is between 1–5.5 bar.
- If the water pressure exceeds 80 psi / 5.5 bar, install a pressure limiting valve in your supply
system.
•
If the supply pressure is lower than 1 bar, you can use an auxiliary pump to compensate the low
pressure.
•
If you do not know how to check the water pressure, please consult a professional plumber.
•
If there is a risk of water hammer in your installation, always use a water hammer protection device in
that installation.
•
Please consult a professional plumber if you are not sure if there is water hammer in your
installation.
•
Do not make any installation on the hot water inlet.
•
Take the necessary measures to avoid the risk of the hoses freezing.
•
The water temperature operating range must be min. 33 °F / 0.6 °C and max. 100 °F / 38 °C.
A
If the product is damaged and if you see gas leak, please
keep away from the gas. It may cause frostbite when it
comes into contact with the skin. (including R600a)
Ignore this warning if the cooling system of your product
contains R134a.
The type of gas used in the product is stated on
the nameplate, which is on the left wall inside the
refrigerator.
WARNING
Never throw the product into fire for disposal.
WARNING
Never connect the product to a cold water supply with a
pressure of 80 psi / 5.5 bar or higher.
9
INSTRUCTIONS
2.
Publicidad
