Silverline 268953 Traducción Del Manual Original página 7

General Power Tool Safety Warnings
WARNING: When using electric power tools, basic safety precautions should always be
followed to reduce the risk of fire, electric shock and personal injury including the following safety
information. Read all these instructions before attempting to operate this product and save these
instructions for future use.
WARNING: This appliance is not intended for use by persons (including children) with reduced
physical or mental capabilities or lack of experience or knowledge unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children must be supervised to ensure that they do not play with the appliance.
CAUTION: Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the power tool for
operations different from those intended could result in a hazardous situation.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
a) Keep work area clear. Cluttered areas and benches invite injuries.
b) Consider work area environment:
• Do not expose tools to rain.
• Do not use tools in damp or wet locations.
• Keep work area well lit.
• Do not use tools in the presence of flammable liquids or gases.
c) Guard against electric shock. Avoid body contact with earthed or grounded surfaces (e.g. pipes,
radiators, ranges, refrigerators).
d) Keep other persons away - Do not let persons, especially children, not involved in the work
touch the tool or the extension cord and keep them away from the work area.
e) Store idle tools. When not in use, tools should be stored in a dry locked-up place, out of reach of
children.
f) Do not force the tool. It will perform the job better and safer at the rate for which it was
intended.
g) Use the right tool. Do not force small tools to do the job of a heavy duty tool. Do not use tools
for purposes not intended; for example do not use circular saws to cut tree limbs or logs.
h) Dress appropriately:
• Do not wear loose clothing or jewellery, which can be caught in moving parts.
• Suitable safety footwear is recommended when working outdoors.
• Wear protective covering to contain long hair.
i) Use protective equipment:
• Use safety glasses.
• Use face or dust mask if working operations create dust.
WARNING: Not using protective equipment or appropriate clothing can cause personal injury
or increase the severity of an injury.
j) Connect dust extraction equipment. If the tool is provided for the connection of dust extraction
and collecting equipment, ensure these are connected and properly used.
k) Do not abuse the power cable. Never yank the power cable to disconnect it from the socket.
Keep the power cable away from heat, oil and sharp edges. Damaged or entangled power cables
increase the risk of electric shock.
l) Secure work. Where possible use clamps or a vice to hold the work. It is safer than using your
hand.
m) Do not overreach. Keep proper footing and balance at all times.
n) Maintain tools with care:
• Keeping cutting tools sharp and clean makes the tool easier to control and less likely to bind or
lock in the workpiece.
• Follow instruction for lubricating and changing accessories.
• Inspect tool power cables periodically and if damaged have them repaired by an authorized
service facility.
• Inspect extension cables periodically and replace if damaged.
• Keep handles dry, clean and free from oil and grease.
WARNING: Many accidents are caused by poorly maintained power tools.
o) Disconnect tools. When not in use, before servicing and when changing accessories such as
blades, bits and cutters, disconnect tools from the power supply.
WARNING: The use of accessories or attachments not recommended by the manufacturer may
result in a risk of injury to persons.
p) Remove adjusting keys and wrenches. Form the habit of checking to see that keys and
adjusting wrenches are removed from the tool before switching it on.
q) Avoid unintentional starting. Ensure switch is in "off' position when connecting to a mains
socket or inserting a battery pack, or when picking up or carrying the tool.
WARNING: Unintended starting of a tool can cause major injuries.
r) Use outdoor extension leads. When the tool is used outdoors, use only extension cords
intended for outdoor use and so marked. Use of an extension cable suitable for outdoor use
reduces the risk of electric shock.
s) Stay alert:
• Watch what you are doing, use common sense and do not operate the tool when you are tired.
120W Multi Grinder 75mm
• Do not use a power tool while you are under the influence of drugs, alcohol or medication.
WARNING: A moment of inattention while operating power tools may result in serious personal
injury.
t) Check damaged parts:
• Before further use of tool, it should be carefully checked to determine that it will operate properly
and perform its intended function.
• Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and
any other conditions that may affect its operation.
• A guard or other part that is damaged should be properly repaired or replaced by an authorized
service centre unless otherwise indicated in this instruction manual.
• Have defective switches replaced by an authorized service centre.
WARNING: Do not use the tool if the on/off switch does not turn it on and off. The switch must
be repaired before the tool is used.
u) Have your tool repaired by a qualified person. This electric tool complies with the relevant
safety rules. Repairs should only be carried out by qualified persons, otherwise this may result in
considerable danger to the user.
WARNING: When servicing use only identical replacement parts.
WARNING: If the power cable is damaged it must be replaced by the manufacturer or an
authorised service centre.
v) Power tool mains plugs must match the mains socket. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and
matching sockets will reduce risk of electric shock.
w) If operating a power tool outside use a residual current device (RCD) - Use of an RCD
reduces the risk of electric shock.
NOTE: The term "residual current device (RCD)" may be replaced by the term "ground fault circuit
interrupter (GFCI)" or "earth leakage circuit breaker (ELCB)".
WARNING: When used in Australia or New Zealand, it is recommended that this tool is ALWAYS
supplied via Residual Current Device (RCD) with a rated residual current of 30mA or less.
WARNING: Before connecting a tool to a power source (mains switch power point receptacle,
outlet, etc.) be sure that the voltage supply is the same as that specified on the nameplate of the
tool. A power source with a voltage greater than that specified for the tool can result in serious injury
to the user, and damage to the tool. If in doubt, do not plug in the tool. Using a power source with a
voltage less than the nameplate rating is harmful to the motor.
Bench Grinder Safety
a) Prior to use, check grinding or wire brush wheels. Do not use mis-shaped, cracked, heavily
worn or damaged wheels. Such wheels are unsafe and cause operator injury.
b) Always wear appropriate personal protective equipment. When using a grinder, safety
goggles, ear defenders and dust masks should be worn.
c) Always use grinding or wire brush wheels specifically designed or the correct specification
for the grinder. Ensure the maximum diameter is not exceeded, the bore fitting is the correct
exact size and the thickness of the wheel is compatible.
d) Spark arrestors must be frequently adjusted. As the wheel wears keep the distance between
the wheel and arrestor as close as possible, no greater than 2mm.
e) Do not attempt to use a bench grinder that isn't securely fastened. The grinder should be
bolted to a work surface or securely clamped if it cannot be permanently attached.
f) Combined or dual bench grinders should be fully assembled with both sides fitted with
wheels. Do not attempt to use such a grinder with only one wheel installed.
g) Do not exceed the duty cycle of the grinder. Only use the grinder for the maximum stated
time and always allow the required switched-off cooling period.
h) Do not exceed the maximum wear of the wheel stated by the wheel manufacturer. This
may be physical size reduction or, in some instances, a maximum number of hours of use.
i) Ensure wheels are stored according to the wheel manufacturer's instructions. If you suspect
that a wheel has degraded in storage DO NOT USE.
j) Ensure that grinding wheels are fitted correctly and securely prior to use. Tighten grinding
wheel lock nuts, secure bolts and check all clamps and guards.
k) After fitting a new grinding wheel, stand to one side of the grinder and switch 'ON'. Let the
grinder operate at full speed for approximately one minute to allow undetected flaws or cracks to
become apparent especially if the first use of a wheel.
l) Keep fingers clear of the grinding wheels at all times. Do not work with very small workpieces
that could cause your fingers to contact the grinder or wire brush wheel.
m) DO NOT attempt to use a grinding wheel for a cut off operation.
Hobby Tool Safety
a) This power tool is intended to function as a grinder, sander, wire brush, polisher, carving
or cut-off tool. Read all safety warnings, instructions, illustrations and specifications
provided with this power tool. Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
b) Do not use accessories which are not specifically designed and recommended by the tool
manufacturer. Just because the accessory can be attached to your power tool, it does not assure
safe operation.
silverlinetools.com
7