cecotec CONGA GRASSHOPPER 300 Manual De Instrucciones página 125

6. TROUBLESHOOTING
Information shown
on the display
E1
E2
E3
Meaning
The mower is outside
the working area
The wheels of the
mower are blocked
The blade disc is
blocked
Action required
Place it within the area enclosed by
1.
the boundary wire.
Check that the red and black
2.
terminals are not connected
backwards.
If the error still appears, contact the
3.
official Cecotec Technical Support
Service.
1. Turn the mower off and place it in an
area where there are no obstacles.
2. Switch on the mower. Press the
button and then
3. If the error code still appears on the
display, disconnect the mower. Then,
turn it over and check if anything is
obstructing the wheels.
4. If there is, remove it. Next, turn the
mower over again and switch it on.
Press the button and then
1. Disconnect the mower.
2. Turn it over and check if anything
is preventing the blade disc from
rotating properly. If the disc or motor
is damaged, contact the official
Cecotec Technical Support Service.
3. Remove any obstructions you find.
4. Turn the mower upside down and
place it in an area where the grass
height is lower or adjust the cutting
height to a higher level.
5. Switch on the mower. Press the
button and then
CONGA GRASSHOPPER 300
ENGLISH
.
.
.
125