cecotec CONGA GRASSHOPPER 300 Manual De Instrucciones página 19

complete stop and have been switched off. Individual
hazards: to avoid injury, wear protective gloves and goggles
when servicing or replacing blades.
- Do not touch moving parts, such as the blade disc, before it
has come to a complete stop.
- WARNING: to recharge the battery, only use the power
supply unit supplied with the appliance, reference CGF2506
and the charging station CB05A.
- Do not place the charging station in a location where there
is a risk of standing water or where flooding is likely to
occur.
- Do not place the charging station (or any of its accessories)
within 60 cm of any combustible material. In the event of
a malfunction, the charging station and the power supply
may overheat, which could cause a fire.
- Do not place the power supply on the floor. Place it at
a minimum height of 30 cm, so that there is no risk of it
coming into contact with water.
- When connecting the power supply to the mains socket,
use a residual current device (RCD) with a tripping current
of max. 30 mA.
- If the cable (or plug) is damaged, do not connect it. If the
cable is damaged and connected to the mains, do not
touch it until it is disconnected. Disconnect the plug from
the socket if the cable is damaged during operation of
the appliance. If the cable is worn or damaged, the risk of
electric shock increases. If the cable is damaged, it must be
replaced by qualified personnel.
- Charge the appliance only in the charging station provided.
- Only use original batteries. The safety of the product
cannot be guaranteed if non-original batteries are used.
Do not use non-rechargeable batteries.
CONGA GRASSHOPPER 300
19