SICK WLD4F 30 00 Serie Instrucciones De Uso página 25

3.2 Intended use
3.3 Operating elements and status indicators
3.4 IO-Link communication interface
4 Mounting
8025303.1N1Y/2024-03-11 | SICK
Subject to change without notice
The WLD4F is an opto-electronic photoelectric retro-reflective sensor (referred to as
"sensor" or "product" in the following) for the optical, non-contact detection of objects,
animals, and persons. A reflector is required for it to function. If the product is used
for any other purpose or modified in any way, any warranty claim against SICK AG shall
become void.
Table 1: Operating elements and status indicators
WLD4FP- xxxxxx30A00
Teach-in button
1
2
4 3
BluePilot blue: alignment aid
1
Teach-Button: adjusting the sensitivity
2
Yellow LED: status of received light beam
3
Green LED: supply voltage active
4
The product comes with the IO-Link communication interface.
IO-Link communication is a master-device communication system.
The product can be operated in standard I/O mode (SIO) or IO-Link mode (IOL). All
automation functions and other parameter settings are effective in IO-Link mode and in
standard I/O mode.
The following functions are supported via the standard IO-Link communication inter‐
face:
• Flexible sensor settings
• Digital transmission of sensor signals to the IO-Link Master
• Visualization and configuration of the sensor
• Diagnostics /condition monitoring
•
Device identification
• Easy device replacement
• Events
A detailed description of the configurable functions and associated indices can be
found in the "IO-Link description" technical Information:
electric sensors, SICK Smart Sensors /
Mount the sensor and the reflector using suitable mounting brackets (see the SICK
range of accessories). Align the sensor and reflector with each other.
OPERATING INSTRUCTIONS
xxxxxx00A00
No possibility of setting No possibility of setting
1
4 3
Technical Information: Photo‐
IO-Link.
O P E R A T I N G I N S T R U C T I O N S | WLD4F
xxxxxxA0Zxx
en
4 3
25