Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
SECTION I:
INSTALLATION
GENERAL DESCRIPTION: The FF-95 is designed to be installed in an outside wall so the full advantage of
installation simplicity can be made with the "Flue Pipe", which eliminates the need for tall chimney type flues. No
hearth or fire surround is required.
STANDARD INSTALLATION PARTS
The following standard installation parts are enclosed with heater. For alternate installation methods, you may need
to purchase additional accessories which are available from your TOYOTOMI dealer. (See ACCESSORY PARTS)
Wall Bracket (2 sets) (PART #17212589)
Bind Tapping Screw (2) (PART #17187555)
Wood Screw (2) (PART #17206066)
(1) (PART #17206066)
Drip Tray (1) (PART #17185415)
(Room temperature sensor)
Pipe Holder (1) (PART #17212685)
Pipe Stopper (1) (PART #17212778)
(3)
Flue Pipe (1) (PART #17224296)
Wood Screw (3)
Exhaust Air Cap (1) (PART #17212661)
Bent Joint (L) (1)
Insulating Cover (1)
(PART #17206066)
Intake Air Cap (1) (PART #17212656)
(PART #17214698)
(PART #17206025)
L-shaped Hose (2) (PART #17212692)
Inlet Hose (1) (PART #17206091)
Hose Band (2) (PART #17212677) (Hose Clamp)
Oil Catch (1) (PART #17185025)
GB
14
Publicidad
