Create WIND BRAID Manual Del Usuario página 10

IN STAL LIN G THE MOU NT I NG B R ACKE T
Before installing the mounting bracket you should check the ceiling where the fan is to be
installed and check if it is suitable for it.
Concrete ceiling
Drill 2 holes with an 8mm drill bit, accord-
ing to the length of the expansion bolts.
Next, fix the mounting bracket to the ceil-
ing with the screws.
Do not fix the mounting bracket directly on ceilings less than 10mm to avoid the risk of the
screw loosening and coming out.
B L AD E I N STALL AT I ON
1. Put the screw washers on each screw before the installation of the apas.
2. Align the holes in the blades with the screw holes in the motor. Once the blade is well
placed, tighten the rest of the screws so that they are fastened.
3. Fit the remaining blades and permanently tighten the screws making sure the blades are
fully seated.
E NGL I SH
10
Wood roof
Attach the mounting bracket to the wood
ceiling with 4 minimum 7mm thick screws.