Create WIND BRAID Manual Del Usuario página 12

M OU NT IN G OF TH E CANO PY
• Lift the canopy up to the mounting bracket and align the loosened screws on the mounting
bracket with the holes in the canopy.
• Rotate the canopy to adjust it. Reinsert the screws and fix them with a screwdriver.
• Once you have the mounting bracket secured to the junction box you can proceed to hang
the fan.
• Hold the fan firmly with both hands. Thread the bar through the opening in the mounting
bracket and let the ball rest on the mounting bracket.
• Rotate the ball coupling until it lines up with the tab on the mounting bracket.
Advice: Another person should help you hold the ladder and hand you the fan once you've
climbed the ladder.
AS SE MB LY OF T HE LI GHT PANE L AND T HE L E D PL AT E
1. Lift the wicker shade up so the light panel
can be attached.
3. Fix the light panel to the bottom of the
motor body by fastening it with the fix-
ing screws, matching the holes in the
panel with the slots in the holes in the
motor.
E NGL I SH
12
2. I unscrew the fixing screws of the motor.
4. Then connect the led board wires and put
the led board into the light panel. This
plate is magnetized, you should not put
any fixing tool.