Publicidad
Idiomas disponibles
Idiomas disponibles
The following show examples ofconnections
commonly used toconnect theDVDplayer e ither T Vand other
components.
Notes
o Be sure to tumoffthe
power to all components
in the system before connecting
another
component.
o Refertothe
lnstruction
ManualsforyourTV,
stereo system and any other components
to be connected
to the
DVDplaye_
Stereo system
Audio Input Jacks
/_JDIO OUT
Audio Out
NI_
• Method
1 DVD Player + Stereo
system
• Method
2 DVD Player
+ Dolby Digital decoder
or DTS decoder
Dolby Digital decoder
DTS decoder
Digital Audio
0rn_
Input Jacks
[]
°r l
DIGITALOffT
0 (PO4effs_E_4)
iOut
Notes
• If output
Dolby Digital audio, connect
to a Dolby Digital
decoder,
and set Dolby Digital
to on for audio out-
put in the setup mode.
• If output
DTS audio, connect
to a DTS decoder,
and set DTS to ON for audio output
in the setup mode.
• Unless connected
to a Dolby Digital decoder,
or a DTS decoder,
set Dolby Digital or DTS to off for audio out-
put in the setup mode. Playing
a DVD using incorrect
settings
may generate
noise distortion,
and may also
damage
the speakers.
• The audio source on a disc in a 5.1 channel
Dolby Digital
surround
format cannot be recorded
as digital sound
by an MD or DAT deck.
• Set Dolby Digital and DTS to off for audio output in the _tup mode. Playing a DVD using incorrect
_ttings
may
generate noise distortion,
and may also damage
the speakers.(See
page 27 to set ON for Dolby Digital and DTS)
-13-
Publicidad
