Publicidad
Idiomas disponibles
Idiomas disponibles
Basic Audio
Good picture
VIDEO
_N
Better picture
S_VIDEO
IN
or
Best picture
GOMPONENT
iN
AV Cabk
or
-AUDIO QOT"_
N
m
Audio
out
Video out
• Method
1 DVD Player
+ TV with Video Input Jack
• Method
2 DVD Player + TV with S-Video
Input Jack
• Method
3 DVD Player + TV with Component
Video Jacks
S-Video
Cable
841DE0
OUT
©
m
S-Video
out
or
COMPONENT
VIDEOOUT '
EYL
Component Video out
Notes
• If your TV is compatible
with progressive
scanning
(480p),
connect
the TV to the Component
Video Output
jacks of the DVD player. Refer to page 12.
• Connect
the DVD
player
directly
to a TV. If the AN
cables
are connected
to a VCR,
pictures
may be
distorted
due to the copy protection
system,
HOW
TO CONNECT
TO A TV WITHOUTAUDIO/VIDEO
INPUT
JACKS
If your TV does not have RCA type audio and video input jacks
it is still possible
to connect
this DVD
player to your TV's 75-ohm coaxial antenna terminal using an optional
Stereo Audio/Video
RF Modulator,
not
included.
Connect
the audio and video outputs
of the DVD player to the audio and video inputs on the RF
Modulator,
and then connect the coaxial output of the RF Modulator
(usually marked "TO TV") to the 75 ohm
coaxial antenna terminal on your TV. Follow the instruction
supplied with the RF Modulator
for more details,
If your TV's 75 ohm coaxial
antenna
terminal
is already
occupied
by an antenna or cable box connection,
remove
that cable from your TV's antenna
terminal
and reconnect
it to the coaxial
antenna
input terminal
of the RF Modulator
(usually
marked
"ANT IN"), then connect
the RF modulator
to your TV's
antenna
lerminal
as described
above,
Note
• The picture quality from DVD discs will not be as good if the DVD player is connected to the TV's
antenna terminal through an RF Modulator,
- 14-
Publicidad
