3.5 Markings and signs on the product
Various markings and signs are affixed to the product. If these are
damaged or removed, please replace them immediately with new ones in
the same location.
The operating company is obliged to post further markings and signs on
the product and the surrounding area if necessary.
Such notes and signs might be related, for example, to the requirement for
wearing personal protective equipment.
In the country of use, additional required safety instructions and
pictograms can be provided by the manufacturer in accordance with
applicable law.
3.6 Residual Risk
Even when all safety rules are observed, when operating the product a
residual risk remains, as described below.
All persons working on and with the product must be aware of these
residual risks and follow the instructions that prevent these residual risks
from causing accidents or damages.
WARNING
Danger of serious injury to the lungs and respiratory tract – always wear
respiratory protection, Class FFP2 or higher.
Skin contact with dust, etc. can cause skin irritation in sensitive persons –
wear protective clothing.
Dust can escape into the environment through leaks in the filter section
and connecting pipes. Eliminate leaks immediately and clean the
contaminated area. Wear respiratory protection and protective clothing.
Before carrying out any repair, set-up and maintenance work on the
pneumatic system, it must first be depressurised.
The product is only fully functional when it is switched on.
DANGER
Life-threatening injury due to electric shock!
Pull out the mains plug before all repair, set-up and maintenance work
on the product.
Secure the product against unintentional switching on. Put up warning
signs.
1502828-04
- 67 -
EN