Publicidad
Idiomas disponibles
Idiomas disponibles
7.2 Maintenance
Regular inspection and servicing have a positive effect on the reliable
functioning of the product.
Observe the warning notices for servicing and fault clearance in the
chapter Safety.
The upkeep/maintenance of the product is essentially limited to the visual
control of damage or leaks, as well as cleaning the outer surfaces.
WARNING
Skin contact with dust etc. can lead to skin irritation in sensitive
individuals.
Serious injury to the lungs and respiratory tract is possible!
To avoid contact with and inhalation of such dusts, wear disposable
gloves and disposable respiratory protection, Class FFP2 or higher.
When cleaning, the release of dangerous dust must be avoided, so that
bystanders are not injured.
NOTE
Do not clean the product with compressed air. This may result in dust
and/or dirt particles getting into the ambient air.
Always ensure there is adequate lighting for maintenance tasks.
7.2.1 Changing the dust collection container
The level in the dust collection container must be checked at regular
intervals and the dust collection container changed as necessary.
The time until the dust collection container must be exchanged depends
on the type and quantity of the attacking dust. The operator must check
the level by hand at regular intervals to avoid the dust collection container
becoming overfull.
The dust collection container must always be exchanged in good time to
avoid contamination of the surroundings.
1502828-04
- 85 -
EN
Publicidad
