Publicidad
Idiomas disponibles
Idiomas disponibles
4.3 Safety instructions for transporting the product
DANGER
•
Potentially fatal crushing injuries when lifting and transporting the
individual components of the product! Incorrect installation can cause
components to fall down.
•
Incorrect lifting and transport can cause the components of the
product to tip over and fall down.
•
The components of the product may only be lifted and transported
with suitable lifting gear.
•
Never stand under suspended loads or under improperly installed
components.
•
Lift and transport the individual components of the product with a
single forklift only. The permissible load of the forklift must not be
exceeded.
•
Use suitable standard-compliant climbing aids and ensure that you
are standing securely.
•
Observe the applicable accident prevention and occupational safety
regulations.
•
Follow the instructions and regulations of the carrier.
The following safety instructions must be observed when transporting the
product with a crane:
•
Check that lifting gear is fixed firmly at the attachment points and on
the crane hook.
•
Attach the transport ropes to the crane hook in such a way that, when
taut, they do not touch the machine parts lying above the attachment
points.
•
Use a loading harness if necessary.
•
Adjust the lengths of the suspension cables so that the components of
the product hang horizontally. Hook the suspension cables with
shackles into all eyebolts/crane lugs. The angle of the suspension cables
to the vertical must not exceed 30° and the eyebolts/crane lugs must
not be loaded laterally. The eyebolts/crane lugs must not be deformed
and should not be subsequently colour-coded (especially red) due to
the risk of confusion.
1502828-04
- 69 -
EN
Publicidad
