Medion MD 37763 Manual De Instrucciones página 117

9.2. Extra rinse/extra dry
/
Press the button after you have set the desired
program to run an additional rinse and/or dry cycle. The
following activations are possible:
P1 Press once
Press twice Extra dry
Press three
times
P2 Press once
P3 Press once
Baby bottles Press once
Press twice Extra dry
Press three
times
Glasses Press once
Press twice Extra dry
Press three
times
The program duration increases when the extra rinse/ex-
tra dry functions are activated.
9.3. Changing the program
You can only change the program if the appliance has
been operating for a short time. If the appliance has al-
ready been running for a longer time, the detergent and
water must be replenished and the required program
must be restarted.
 Press the
button (15) to interrupt the program.
 Press the
P button (22) for approx. 3 seconds until the
program changes.
 Select another program: To do this, press the program
selection button P , the
cleaning program, the
bottle cleaning program or the
short program.
 Press the
button again to start the program.
Extra rinse
Extra rinse/dry
Extra rinse
Extra rinse
Extra rinse
Extra rinse/dry
Extra rinse
Extra rinse/dry
button (16) for the glass
button (17) for the baby
button (18) for the
9.4. Opening during operation
The door can be opened while a program is running, al-
lowing more dishes to be loaded or others to be removed.
This is only efficient if the program has only been running
for a short time, as otherwise the newly loaded dishes
might no longer be fully cleaned.
 While the program is running, press the
(15). Wait about 3 seconds until the spray arm stops ro-
tating and then open the door.
 Load the additional dishes and/or remove items.
 Close the door again fully. Press the
to continue the program. The appliance continues af-
ter approx. 10 seconds.
9.5. Use start delay
You can start the wash program at a later time. Select be-
tween 1 and 24 hours for the start delay.
 Switch on the appliance by pressing the
(23).
 Select a wash program as described above.
 Use the
button (20) to select the desired delay,
after which the appliance is to start the wash program.
The display field indicates the selected delay.
 Press the
button (15) to confirm the setting.
The appliance starts automatically after the set delay time.
9.6. Selecting a wash program
The following table shows the various wash programs and
their applications.
 Set an energy saving or quick program if possible, e.g.
the "ECO" or "Quick" program.
DE
FR
NL
ES
button
IT
EN
button again
button
115