Publicidad
Idiomas disponibles
Idiomas disponibles
9.7. End of the wash program
WARNING!
Risk of scalding!
Hot water/hot steam can escape and cause burns if the
door is opened while a program is running.
Do not fully open the door immediately – wait instead
until the appliance has cooled down.
CAUTION!
Risk of tripping!
The opened door constitutes a trip hazard.
Close the appliance door again after a wash cycle has
finished.
Once the program has ended, acoustic signals sound and
End appears on the display field (19).
Switch off the appliance using the
The appliance switches off automatically a short time after
the end of the wash cycle.
Open the door slightly so that the steam can escape.
Wait a short time before removing the cutlery/dishes
so that the dishes dry more quickly and the heat can
escape.
Remove the dishes and cutlery. It is normal for the ap-
pliance to be damp inside.
10. Cleaning and maintenance
DANGER!
Risk of electric shock from live parts.
Always pull out the mains plug each time before clean-
ing or maintenance.
10.1. Pump water out of the water tank
In standby mode, press and hold the
and the
button (16) simultaneously for 3 seconds
to empty the water tank manually (e.g. before a long
period of non-use).
10.2. Filter system
The filter system (5) in the base of the appliance interior
retains coarse impurities from the rinsing cycle, including
foreign objects such as toothpicks or shards. The collected
coarse impurities can lead to clogging of the filters. Check
the condition of the filters regularly, carefully remove for-
eign objects and clean the parts of the filter system with
water if necessary. Carry out the following steps to clean
the filter.
The filter is made up of two parts:
A
B
Fig. 23 – Filter
A
Fine filter for small particles:
This filter retains food residue on the bottom of the
appliance and prevents it from becoming deposit-
ed on the dishes during the wash cycle.
B
Main filter:
Food residue and dirt particles retained on the
main filter are released by the lower spray arm and
rinsed into the fine filter.
NOTICE!
Possibility of damage to the appliance!
Operation without the filter will damage the appliance.
Never start the appliance without the installed filter
system.
An incorrectly inserted filter can damage the appliance
or dishes.
10.2.1. Cleaning the fi lter
button (23).
To ensure that the appliance continues to wash effectively,
the filter must be cleaned at regular intervals.
To remove the filter, twist off the fine filter and remove
it (see Fig. 24).
Remove the main filter.
Rinse the filter under running water and clean it thor-
oughly with a brush. After each wash cycle, check
whether larger objects are blocking the filter and re-
move them immediately.
button (17)
Proceed in the reverse order to refit the filter system.
Fig. 24 – Removing the filter
DE
FR
NL
ES
IT
EN
117
Publicidad
