Descargar Imprimir esta página

Medion MD 37763 Manual De Instrucciones página 122

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 65
Fault
The dishes are not clean.
Glasses are spotty.
Black or grey spots on the
dishes.
The detergent compart-
ment still contains deter-
gent after the wash cycle.
Fault
The dishes are not dried.
The dishes are not dried.
120
Unsatisfactory wash result
Possible cause
The dishes were not ar-
ranged correctly.
The selected program was
not suitable.
Not enough detergent
was used.
Individual dishes are
blocking the path of the
spray arm.
The filter is not inserted or
is fitted incorrectly.
Combination of soft water
and too much detergent.
Aluminium cutlery/ac-
cessories have come into
contact with the plates.
The lid of the deter-
gent compartment was
blocked by dishes.
Unsatisfactory drying results
Possible cause
The dishes were not ar-
ranged correctly.
The dishes were removed
too soon.
Incorrect program select-
ed.
Solution
 Arrange the dishes correctly (see section "8.6. Loading
the dishes and cutlery" on page 112).
 Select a more intensive program (see section "9.6. Se-
lecting a wash program" on page 115).
 Use more or another detergent.
 Rearrange the dishes so that the spray arm can move
freely.
 Clean and/or insert the filter correctly. Also clean the
spray arm (see section "10.3. Cleaning the appliance" on
page 118).
 Use less detergent if you have soft water and use the
shortest wash program to wash glasses correctly.
 Use a mild detergent to remove the spots.
 Rearrange the dishes.
Solution
 Arrange the dishes correctly (see section "8.6. Loading
the dishes and cutlery" on page 112).
 Do not remove the dishes immediately after the pro-
gram is finished.
Open the door slightly so that the steam can escape.
Remove the dishes while they are still slightly warm.
 The temperature is lower in programs with a short
runtime. Select a program with a longer runtime and
higher temperature.

Publicidad

loading