Saeco Xsmall Steam Instrucciones De Uso página 29

Light Signals
Quickly fl ashing
Slowly fl ashing
+
Flashing counterclockwise
+
Flashing simultaneously
Flashing alternately
Causes
The machine needs to be primed.
Brew group not inserted.
Dregdrawer not inserted.
Service door is open.
Control dial is not in correct
position.
The machine is performing the
rinse/self-cleaning cycle (see
Section.4.5).
An error has occurred.
A fault has occurred in the brew
group.
29
Solutions
Fill the tank with fresh drinking
water and prime the water circuit as
described in section 4.4.
Make sure that all components have
been correctly inserted and closed.
The machine ends the cycle
automatically.
You can interrupt the cycle by
pressing either coffee button.
Turn the machine off. After
30-seconds, turn it back on.
Try this 2 or 3 times.
If the machine does NOT start,
contact an authorized service
center.
Try again to brew another coffee.